7
2.
Pull out the lift pole and install the oil tray on the lift pole.
3.
Install and fix the oil tray, strain, extension funnel together.
4.
Ensure the lift pole is perpendicular to the equipment.
5.
Please lift up the oil tray above cylinder with 1cm height during installation of cylinder. Fix the lifting pole to
position to avoid rubbing against each other.
6.
Insert the extension funnel pieces into its bump slot one by one, push it to the button till each pieces are even.
7.
Tighten the screw.
Operation instructions
Oil Collections(FIG.4)
1.
Lift the vehicle up, then Push the machine to the place right under the engine oil
outlet.
2.
Turn on ball valve
④
at first.
3.
Open the ball valve
⑦
under the oil tray and unscrew the oil drain plug of
engine.
FIG.4
FIG.3
