9
engine.
3.
Turn on the ball valve
○
6 .
4.
If waste oil only extracted into the cylinder. Please make sure the ball valve
○
3 is closed.
5.
If waste oil extracted to the oil tank through the cylinder. Please open the ball valve
○
3 accordingly.
Warning: Also the oil tank need to be vacuum before extraction operation.
6.
After finish extraction, turn off the ball valve
○
6 on the extraction pipe.
Note: Extraction of hot-oil, max. temperature for oil 60
. Please do not
℃
exceed 60
. Please hold the black
℃
sleeve to avoid scald.
Ejection(FIG.9)
Oil ejection from cylinder to underside oil tank
1.
When the oil level reached cylinder ‘STOP’ warning line, please empty the cylinder with oil ejection.
2.
Turn on ball valve
○
7 at first.
3.
Turn on ball valve
○
3
，
at the same time turn on mini ball valve
○
6 from the hose to release cylinder pressure
and oil drain into the oil tank.
4.
Turn off valves
○
3 and
○
6 after ejection.
More about oil ejection from cylinder
1.
Turn on valve
○
3 , if vacuum existed in the tank, and then oil from cylinder will be fast transferred into the
tank.
2.
If no vacuum existed in the tank, turn on the ball valve
○
7 and
○
6 for helping making a quicker
transferring of waste oil into the tank.
3.
Turn off valve
○
3 and ball valve
○
6 after ejection finished.
4.
Continuously repeating above operation steps for oil ejection before oil contained in the cylinder reaching
“STOP” level on the sticker of cylinder.(Which is eject oil before cylinder reaching full)
FIG.6
FIG.7
FIG.8
