3. Unpacking and assembly
Attach the body to the grinder.
(Make sure no gap in between)
Handle
Sand Paper
L Wrench
Please prepare a Belt sander and
angle grinder Grinder.
Only Bosch or Makita can be installed
.
First, the roller is attached to angle
grinder.
Adjust preferred angle(15-30
°
).
and fasten the body bolt with L wrench.
Don’t tighten the fixing bolt.
Just check it doesn’t loosen.
First,
Put the sandpaper on the drive roller.
Attach the sandpaper while pressing down on the
housing.
Sand paper is installed properly as shown in the picture
above.
Attach the handle to the handle mounting area.
1
2
3
4
5
6
7
8
9
Drive Roller
