Manta Bumble Bee-MM209 User Manual Download

Page: 11 / 16

BUMBLE-BEE

MM209

RADIO or CD or MP3 RECORDING

1. Insert a cassette tape.
2. Set the FUNCTION SWITCH to RADIO position

and tune the TUNING knob to the desired broadcast
station, or set the FUNCTION SWITCH to CD position
and turn on the CD by pressing PLAY/PAUSE button.

3. Push down RECORD button and PLAY button

simultaneously.

4. When recording is over, press the STOP/EJECT

button, then set the FUNCTION SWITCH to TAPE
(OFF) position.

Radio Operation

  1.  Set FUNCTION SWITCH to the AM or FM position.
  2.  Tune the TUNING KNOB to desired broadcast station.
  3.  Tune off the radio by switching the FUNCTION

SWITCH to CD (OFF)position.

Using the Antenna

Receiving FM Broadcast Extend the antenna for better

reception.

Rotate the unit horizontally for optimum reception, as a

ferrite bar antenna is built into the unit.

Headphone

For private listening, insert a headphone(Not include-

d)into the HEADPHONE JACK. Then SPEAKERS are
automatically cut off.

Playback of CD/MP3

1. Switch the FUNCTION SWITCH to “CD” position.
2. Press the OPEN button to open the disc compart-

ment door, and put a disc into it (with the silk-screen
side face up). After closing the door, the player can
automatically read and show on the LCD DISPLAY
the total number of songs in the disc. The player will
automatically start playback.

3. To pause playback, press the PLAY/PAUSE button.

To resume playing, press the button again.

4. To stop playback, press the STOP button. Press the

OPEN button toopen the disc door, and tack out the
disc after it stops rotation.

SKIP/SEARCH OPERATION OF CD/MP3 DISC

1. PROGRAM (PROG.). The PROGRAM button is

used to program your desired songs, when the unit
is in stop state. You can press this button to program
the songs you wish to playback. Press the Pro-
gram Button once and then press the NEXT button
to select the first song (e.g. the number 7 song in
the disc); press the Program button again and then
press the NEXT button again to select the second
song (e.g. the number 12 song in the disc). Then
press the PLAY/PAUSE Button to start playback.
The player will start playback of the number 7 song
and then the number 12 song; and after playback of
the 12 song, playback will stop. To clear the Program
function, press the STOP Button. This unit will be
programmed to 32 songs.

2. PLAY/PAUSE – Press it to start playback and press

it again to stop playback. Press it again to continue
the playback.

3. Press NEXT button, it will skip/search the songs fast

forward of your choice and at the same time, LCD DI-
SPLAY will display the number of the song selected.

4. STOP Stop playback.
5. Press BACK button, it will skip/search the songs fast

backward of your choice and at the same time, LCD
DISPLAY will display the number of the song selected.

MODE

1. Press the ‘MODE’ button for having the LCD Display

to show ‘RND’. The player will randomly select and
play songs in the CD/MP3 disc.

2. Press the ‘MODE’ button for having the LCD display

to show ‘INTRO’ (i.e. INTRODUCTION). The player
will start playing from th first song to the last song for
your trial listening for four seconds only for each and
every song in the CD/MP3 disc.

3. To repeat the song that is currently playing, press the

‘MODE’ button until the LCD display shows a cycle
symbol.

4. Press the MODE button for having the LCD display

to show a cycle symbol & ‘ALL’ in order to repeat
playing all the songs from the start again.

5. All the above instructions can be cancelled by

just pressing the ‘STOP’ button or press again the
‘MODE’ button till the all symbols above is disappear.

ALBUM Button (only applicable to MP3 disc)

1. Press the ‘ALBUM’ button once, the LCD display will

show ‘ALBUM’& ‘01’.For example, if you want to li-
sten to the songs in directory ‘03’, press the ‘ALBUM’