background image

32L31/37L31/42L31/50L31 中性英文说明书(欧洲模数)(30

8

B方案)T9大板 

1304154

 

 

 

 

 

Power failure or unstable voltage.

Abnormal sound or smell from the device.
AC power cord is damaged.

TV set is damaged due to falling off, knock or impact.

Any liquid or foreign matters enter into the TV set.

Under Following Conditions

Turn off the TV set immediately, 
unplug the power cord from the 
power outlet, and contact 
authorized maintenance 
personnel.

 

If coal gas or other flammable gases leak, do not unplug the power cord of the TV set or other electric 

    appliances; instead, close the valve of the gas immediately and open the doors and windows.

 

 

 

 

 

 

 

 

 

 

 

 

 

Only use 

240VAC  60/50Hz power supply. 

All cables can be connected or pull out only after power supply is turned off.

Do not fix the TV set on instable position, or else it may cause falling off, damage, or even 

     fire.

Do not put the TV set in the environment:

      1. With direct sunshine, moisture, overheating, undercooling or heavy dust;
      2. With flammable or explosive substance;
      3. With flammable or corrosive gas;
      4. In bathroom, kitchen, etc.

Do not use damaged or improper power socket, and ensure that the plug and socket are 

     connected properly.

Keep the power plug and socket free of dust and metal pieces.
Do not damage the power cord:

      1. It is prohibited to refit the power cord;
      2. Do not put heavy object on the power cord;
      3. Keep the power cord away from heat source;
      4. Do not  drag the power cord when unplugging.

Do not connect too many appliances to one power strip, or else it may cause fire due to high 

     power consumption.

Do not let open flame (e.g. lit candle) approach the TV set, or else it may cause electric shock 

     or fire.

Do not put the container filled with water on the TV set, to avoid electric shock or fire caused 

     by water drop of splashing.

Do not penetrate any sharp object, metal or liquid into the signal connector or air vents, to 

     avoid short circuit and product damage as well as electric shock.

100-

This TV must be connected to a three pin socket outlet for safety.

The slots on the case is designed to release heat so as to assure that all inside components 

     will not reach an extra high temperature and can work normally for a long time. Please do not 
     cover the holes while place it. 

 

Warning

Do not touch the plug with wet hands, or else it may cause electric shock.

Indicate the behaviors that must be 
prohibited

Indicate the operations that must be 
performed

2

Safety Warning and Notice

Summary of Contents for LED5002




















Reviews: