23
U
ser’s Manual
EN
Clockwise
(Motor 2)
Clockwise
(Motor 4)
(Motor 1)
Counterclockwise
(Motor 3)
Counterclockwise
Head of the
quad-copter
Tail of the
quad-copter
Left
Right
When the quad-copter is on, checking the rotation direction of the rotor
blades;the front-left and right-back rotor blades should be rotating in
clockwise direction; the right-front and left-back rotor blades should be
rotating in counter-clockwise direction.
If the quad-copter keeps flying to one side, it can be corrected by
adjusting the trimmer on the remote control.
Remarks:
Signal connection between the quad-copter and the remote control is
required for the first use.
Set the connection one by one to avoid signal connection error.
To better protect the battery, please unplug the battery cable from the
power wire after the use.
Trimmer functions
If the quad-copter keeps moving
forward, push down Trimmer A
until it gains balance.
If the quad-copter keeps moving
backward, push up Trimmer A
until it gains balance.
If the quad-copter keeps moving forward/backward even there is no
control signal given, users may adjust the elevator trim to keep the
quad-copter balanced.
STICK MODE 1 or 3:
Pic.18
