EN
9
OPERATE
TWO POWER OPTIONS
•
Use built-in Li-ion battery
DVR can be activated after it has been placed on the vehicle by
pressing the Power Switch for 1 second and turn off by pressing
it again. Charging: connect with USB cable or car charger.
The indicator display red and convert to no light when it is full.
•
Connect with Car Charger
DVR will record automatically when the car starts, turn off and save
the last file when the car stops.
RECORDING
DVR will enter into defaulted recording mode when turn it on the work
indicator bickers and indicates when il is recording The recording file is
saved in the SD/MMC Card. To stop, press Recording Button or ending
when car slops. the work indicator won’t bickers.
CAMERA MODE
Turn on the DVR and press Mode Button to enter into Camera mode. To
take photo by pressing Snap Button.
PREVIEW AND DELETE
Turn on the DVR and press Mode Button twice to enter into Preview
Mode, Press Up or Down to select the previewed file. If it is video file. it
can play or stop by pressing REC Button. If you want to delete it, press
Menu Button to enter into delete mode, and then, select Single, Ali or
Select by REC Button and Up/Down and confirm to delete the file by
press REC Button. Also can select Thumbnail mode and volume (from 1
to 8) under the Preview Mode.
SETTING THE FUNCTIONS
Turn on the DVR and press Menu Button under Video mode or Camera
mode to enter into setting interface. Confirm by REC Button and select
by Up/Down for the following setting Press Menu Button again to exit
after finished.
