M
ANTARO
B
OT
T
ELE
M
E
2
Assembly Instructions &
Quick Start Guide
MantaroBot™
20410 Century Boulevard
Suite 120
Germantown Maryland 20874
www.MantaroBot.com
info@mantarobot.com
Phone 301 528 2244
Fax 301 528 1933
10
Quick Start
The instructions below are a quick outline for getting your TeleMe 2 up and running. Reading the
detailed instructions in the full “MantaroBot TeleMe 2 User Guide and Operating Manual” is highly
recommended. (Before starting, ensure that your WiFi network is on and broadcasting.)
1.
Turn ON the battery power switch located on the front grill at the bottom of the TeleMe 2 near
the right wheel.
2.
Turn ON the TeleMe 2 by pressing the Power ON/OFF push button on the front of the device
holder. Initially, a single beep will be heard and the LED will turn on and blink. After
approximately a minute, a series of ascending tones will be heard indicating that the TeleMe 2
has booted up.
Push button
Power ON/OFF
and / Config
