13
Use the nozzle with its extension diameter 6 mm.
Inject chemical sealing Approve by MANTION SMT in the cells of the engine while starting with 2
blows of trigger at the bottom of the mesh sleeve then distribute 3 other blows while returning
towards the wall. Make this operation in the 4 holes envisaged to this end.
5-
Add the chemical seal around the fitting box in order to fill the cavity around the perimeter.
Clean the surpluses of sealing with a wet sponge.
Respect the time of catch according to the data of the manufacturer before any handling.
4
1
3
2
5
