19
10. Parameters settings
It’s possible, with the "Widoor" application, to adjust settings. This app can be
downloaded on stores.
10.1. Peering a smartphone
a. Turn OFF the switch 1 and turn ON the switch 4.
b. Press briefly one time on the BP Prog.
c.
The LED lights up in magenta
.
d. When the LED is lighted: start the peering on your smartphone.
e.
The LED flashes quickly and then goes out:
the smartphone is peered
.
Note: It is possible to peer several products on a same smartphone, or until 3 smartphones on the
same product. For that, repeat the operations below.
If a 4
th
smartphone is paired, the product desynchronized the oldest used smartphones. To pair
this smartphone, remove the product in the Bluetooth setting of the smartphone.
10.2. Disabling all smartphones
a. Turn OFF the switch 1.
b. Press briefly one time on the BP Prog.
c.
The LED lights up in magenta
.
d. When the LED is lighted: Press and hold down the BP Prog during 10 seconds
e.
The LED flashes quickly and then goes out
: all smartphone are disabled.
Note: All smartphones and all radio switches will be deleted. All settings will be reseted to default
values.
10.3. Adjustable parameters via mobile application
Opening speed
Range: 50 mm/s - 350 mm/s *
Closing speed
Range: 50 mm/s - 200 mm/s *
End of open speed
End of close speed
It allows to adjust a soft arrival on the stoppers
Opening deceleration
It allows to adjust the opening deceleration
Delay before closing
Time: 0 to 60 s
* Measure is given for indicative purpose, using a 50kg door.
Additional features are available in the mobile application.
