2
GUARANTEE - IMPORTANT SAFETY INSTRUCTIONS
.
These instructions must be followed in the interest of personal safety; Keep these
instructions.
This motorization is exclusively designed for opening and closing sliding internal doors. It must not
be used for any purpose other than that specified in these instructions. The manufacturer or
supplier shall not be liable for any damage resulting from improper use thereof. The user alone
shall be solely liable and assume any risks arising from improper use of the product.
This door motor must be installed by persons fully aware of the hazards involved with electric
currents, and having all qualifications to work on domestic installations in accordance with good
practice.
Follow all these instructions because faulty installation can cause injuries.
The assembly steps must be followed, as must the operating instructions, and safety rules must
always be heeded.
Before installing the door motor, check that both the driven part and the supplied motor are in
good mechanical condition; and that the structure has the necessary load-bearing capacity for our
product in its entirety.
The electrical installation must be done according to prevailing national standards. The power
supply must be compatible with our product
(voltage and frequency as specified on the product)
Do not connect the device without first checking that the control circuit is disconnected from the
power supply.
Check the installation frequently to detect any signs of wear and tear or damage. Do not use the
device if it needs repairing or adjusting.
Always disconnect the power supply when cleaning or carrying out any maintenance or servicing
tasks on the product.
Never modify or fit any additional parts to the device that may compromise safety without
MANTION SMT's written permission.
The user alone is solely and entirely responsible for any breach of these safety rules, and any
damage resulting therefrom.
The product must be stored indoors in a dry place at a temperature of between 0 °C and +50 °C.
When fitting it, the installation engineer must heed accident prevention instructions and the
standards in force in the country.
Do not immerse the gear motor in water or splash it.
Do not dispose of it in fire or bring it into contact with flame or any heat source.
Do not use household products or chemicals to clean it.
Do not dispose of the packaging in the environment; treat waste according to the standards in
force in the country
.
Keep products, devices and documentation out of reach of children.
Do not let children play with the fixed control devices. Keep remote controls out of reach of
children.
This product may be used by children over the age of 8 and by persons with reduced physical,
sensory or mental capabilities, or inexperienced persons, if they are properly supervised, or they have
been given proper instructions on the safe use of the product, and possible risks have been removed.
