background image

7

WARNING

WHEN USING THIS LOG SPLITTER, BASIC SAFETY PRECAUTIONS (INCLUDING THE

FOLLOWING) SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK AND PERSONAL INJURY.

IMPORTANT! 

ONLY OPERATE THE LOG SPLITTER WITH THE POWER CORD PLUGGED

INTO A PROPERLY GROUNDED OUTLET THAT SUPPLIES THE CORRECT

LINE VOLTAGE AND A MINIMUM OF 15 AMPS OF CURRENT. FOR
ADDITIONAL PROTECTION, IT IS RECOMMENDED THAT A GFCI 

(GROUND FAULT CIRCUIT INTERRUPTER) OUTLET BE USED.

•  

The Unit is to be operated by one person only! Keep in mind that the operator or user is responsible for accidents
or hazards occurring to other people or their property. Always keep area clear of children, pets, and bystanders

.

•  Never request the assistance of another person to help you remove a jammed log, or for any other reason.

•  Don’t allow children, incapable people, or people who are not familiar with these instructions to operate this log splitter.

•  Dress properly. Do not wear loose closing or jewelry that can be caught in moving parts. Long pants, non-slip gloves and

sturdy work shoes with non-skid soles are recommended when working outdoors. Wear protective hair covering to
contain long hair.

•  Keep the working area clean and free from obstructions, i.e. logs, split wood, etc. Cluttered areas invite injuries.

•  Work only in daylight or in good artificial light.

•  Always inspect your unit before each use and ensure that handles, guards and fasteners are secure and in place. Be sure

that all electrical cords are not damaged or broken.

•  Never attempt to use an incomplete machine or one fitted with unauthorized modification. Any modifications to your

machine can cause personal injuries, and will void your Warranty.

•  Check the log before splitting. It should be free from nails or wire that may fly out during splitting operation. This could

cause personal injury or damage to the machine. The ends of the log should be cut as squarely as possible. 

•  Never attempt to split more than one log at a time, unless the ram is fully extended, and you need the second log to

complete the split of the first log. 

•  Do not attempt to load the log while the ram of the log splitter is in motion. You could get trapped and injured.

•  Keep your hands and body parts away from the open splits and cracks in the log. The wood can close in suddenly and

cause injury. 

•  Do not try to defeat or override any safety features.

•  Stay alert. Watch what you are doing. Use common sense. Do not operate machine when you are tired, ill, or under the

influence of alcohol or other drugs.

•  Never leave the machine unattended when in use.

•  Do not use machine in an area were natural gas, gasoline fumes or flammable liquids are present.

•  Never open the switch boxes or motor cover. Never try to do any electrical repairs yourself. Contact a qualified

electrician, or contact the Mantis Customer Service Department number for help and information.

•  When log splitter is used outdoors, use only extension cords intended for outdoor use.

2. Safety Warnings

Summary of Contents for SwiftSplit 5000






















Reviews: