29
2. Cooker had shut off with
“
” display during
browning
3. Pressure does not build
though there is heat
generation.
a. As this is a 1250 Watts appliance
the heat generated will be high and
therefore, during browning, you
have to keep stirring the contents
constantly. If not, Auto Cut Off can
operate
a. The cooker pot is not properly
closed/the 2 way safety button is
not aligned to the “Close” position.
b. There is no water in the body of
the cooker.
c. The rubber gasket is not in place
or is worn out..
a. When the Auto Cut Off shuts
down the power, due to dry
heating, please disconnect the
cord. Allow to cool, clean the inside
bottom, reconnect the cord and
restart.
a. Close the lid fully
and make sure the
2-way safety button is
aligned to “Close”
position.
b. Make sure there is enough water.
c. Make sure the
rubber gasket is clean
and well positioned.
Make sure that the
sealing rim of the
PROBLEM
REASON
SOLUTION