Programming Remote Control:
All
remote controls must be present during the below process. Any old remote controls that are not
present will no longer function.
1.
Ensure all doors + boot is closed.
2.
Sit in driver
’
s seat (with door closed)
3.
Insert key into the ignition and turn to the
‘
I
’
(Accessories) position.
4.
Press the rear demister button 3 times within 4 seconds
–
if performed correctly, the door locks will
sequence. You are now in learn mode.
5.
Press the lock button on the new remote.
6.
Press the lock button on any old remote controls.
7.
Once you have finished programming, turn the key to the
‘
0
’
(Off) position and remove the key.
Tips:
4. Try pressing the rear demister button 3 times rapidly.
Warning!
This remote contains a button/coin cell battery. If swallowed, a lithium battery can cause severe or fatal
injuries within 2 hours. Keep batteries out of reach of children. If you think batteries may have been swallowed or
placed inside any part of the body, seek medical attention immediately.
