18
Montage- und Betriebsanleitung
Installation and Operating Instructions
EN
IIN
NFFO
ORRM
MAATTIIO
ON
N
The markings on the indexable
insert indicate the rotation order
(1 to 4). This order must be main-
tained!
Rotation order of the indexable
inserts
9.
Place the new or rotated indexable in-
sert half the way into the insert pocket.
10.
Press the indexable insert into the in-
sert pocket, at the same time sliding
the indexable insert down the insert
pocket.
11.
Secure the indexable insert with the
clamping screw.
Fitting a new indexable insert
IIN
NFFO
ORRM
MAATTIIO
ON
N
Tighten the indexable insert using only the suitable TORX® PLUS-Torque
wrench. Tightening torque:
•
Tool diameter < 63 mm: 11,,11 N
Nm
m
•
Tool diameter
≥
63 mm: 33,,55 N
Nm
m
12.
Tighten the clamping screw with the
defined tightening torque in a clock-
wise direction.
RREESSU
ULLTT
The indexable inserts have been re-
placed and the tool is ready for ser-
vice.
Tightening the clamping screw
Montage- und Betriebsanleitung
Installation and Operating Instructions
19
EN
CCaarree aanndd m
maaiinntteennaannccee
•
Protect the high-performance reamer HPR400 plus against corrosion when
stored.
•
Repairs must only be performed at MAPAL.
DDiissppoossaall
Once the high-performance reamer HPR400 plus reaches the end of its service
life, it must be disposed of with due care for the protection of the environment.
The high-performance reamer HPR400 plus can also be sent to MAPAL for proper
disposal.
Montage- und Betriebsanleitung
Installation and Operating Instructions
18
EN
