12
Montage- und Betriebsanleitung
Installation and Operating Instructions
EN
11
PPuurrppoossee ooff tthhee IInnssttaallllaattiioonn aanndd O
Oppeerraattiinngg IInnssttrruuccttiioonnss
These installation and operating instructions describe the proper operation of the
high-performance reamer HPR400. You will find detailed information on how to
change and mount the inserts. In addition, the most important safety instructions
on handling the high-performance reamer HPR400 explained (also referred to as
the "tool" below).
In
section 5 in the following you will find a detailed description of the individual
functions and steps necessary to successfully change the inserts.
The installation and operating instructions form an integral part of the high-per-
formance reamer and must be kept in the immediate vicinity and be accessible to
personnel at all times. A basic precondition for safe working is compliance with
all the safety precautions and instructions for working given in these installation
and operating instructions.
The local safety at work regulations and the general safety regulations for the
field of application of the tool must also be observed. Illustrations in these instal-
lation and operating instructions are provided for general understanding and may
differ from the actual design.
22
CCoonnttaacctt
MAPAL Fabrik für Präzisionswerkzeuge Dr. Kress KG
AAddddrreessss
Obere Bahnstrasse 13
D-73431 Aalen, GERMANY
TTeelleepphhoonnee
+49 (0) 7361 585-0
FFaaxx
+49 (0) 7361 585-1029
EE--m
maaiill
info@mapal.com
IInntteerrnneett
www.mapal.com
Montage- und Betriebsanleitung
Installation and Operating Instructions
13
EN
33
SSaaffeettyy
33..11
TTaarrggeett ggrroouupp
The tool may only be used by trained, authorised and dependable specialist per-
sonnel. The specialist personnel must be able to recognise and avoid hazards and
must therefore have read this document before using the high-performance
reamer HPR400.
The specialist personnel are familiar with the accident prevention regulations,
safety stipulations and instructions from the machine manufacturer which must
be followed and observed during operation of the tool.
33..22
CCoorrrreecctt uussee
•
The high-performance reamer HPR400 and its components are intended only
for cutting operations during manufacturing on machine tools in industrial
applications.
•
The high-performance reamer HPR400 and its components may only be used
when observance of all the instructions given in these operating instructions
is assured.
•
If there is a maximum operating speed indicated on the tool, it must not be
exceeded.
•
Failure to observe these instruction can result in injuries or damage to ma-
chines and accessories for which MAPAL assumes no liability.
33..33
IInnccoorrrreecctt uussee
•
The tool or the tool assembly and additional components may only be used
in accordance with the official specifications, and the maximum operating
speed must not be exceeded.
•
The high-performance reamer HPR400 and associated components must not
be modified or used for any other applications.
•
Unauthorised modifications to the high-performance reamer HPR400 and its
components or use for other than the intended purpose will void all war-
ranty claims against MAPAL.
•
The manufacturer assumes no liability for accidents or damage resulting
from use for other than the correct use.
Montage- und Betriebsanleitung
Installation and Operating Instructions
13
EN
