MapAsia.com Limited MapKing!G10
Page 10
2.2.1 Obtain MKID
After you start MapKing!G10 program from PPC
screen is the registration page. The registration page
is shown on the right. You should see MK ID that is
generated from the unique hardware device signature
embedded in the hardware.
Attention: The MKID must be input correctly to
achieve the correct registration code. Please
aware the character/ number difference, e.g. 0 or O
1 or I.
《
Figure2-2-1a
》
Registration
2.2.2 Obtain Registration Code Online
From the package, you will have a product authorization card with a ‘Product Authorization
Code’ .To get the ‘Product Registration Code’, please follow the steps below:
1.
Connect to Internet and choose registration from http://www.MapKing.com.
2.
Input the ‘Product Authorization Code’.
3.
Input the MKID and make sure you input the correct MKID.
4.
Input the information request correctly. This information is confidential and will use for
upgrade notification and promotion.
5.
Get the ‘Product Registration Code’ for registration.
Remarks: In case there is a change of the MKID due to hardware problem, ROM upgrade or
other reasons, please contact Hardware Service Centre or write to the MapKing™ support
service for the new registration.
2.3 Launch MapKing™
MapKing™ is launched in the similar way like other software installed in your Pocket PC. You
should find the MapKing™ program icon in the main screen. Tap it to launch MapKing™. If
MapKing™ does not show up in the main screen, select ‘Start’ > ‘Programs’ to list all programs
installed in your PPC and you could then launch MapKing™.
2.3.1 Switch Map
User may have more than one map installed. Select ‘Tools’ > ‘Open Map’ will bring up a list of
maps. Simply tap on any item within the list and press ‘Select’ to switch to a new map.
