MapAsia.com Limited MapKing!G10
Page 19
4 Route Planning
IMPORTANT MESSAGE CONCERNING ROUTE PLANNING
The route planning function of MapKing™ is ONLY meant to be and should ONLY be used as a
crude reference. IT SHOULD NEVER BE USED TO DETERMINE ACTUAL DRIVING
DIRECTIONS. The Route Planning function of MapKing™ is subject to the following limitations:
Whilst we have taken great care and endeavours in developing the product, we
CANNOT guarantee that the road network data and routing calculations of MapKing™
are free of any omission or defect.
The road network and traffic conditions in the real world are ever changing, MapKing™
being a pre-packaged product cannot reflect all these changes on a constant basis.
Road network parameters specifically required for route planning, like one-way traffic
indicator or turn restrictions at street crossing, are difficult or almost impossible to obtain
for China or some other Asian countries. The lack of these data would significantly affect
the performance of route planning.
4.1 Routing Planning
4.1.1 Create Start Point/ Midway Point/ Destination
To initiate route planning, at least 2 routing
points (Start, End) must be assigned.
Tap-and-hold at the precise spot and select
‘Start’/ ‘End’ to add a routing point. It should
be noted that route planning is calculated
from the embedded road network data.
Accordingly, the routing points should be
placed either on top of or very close to the
street lines.
There are 3 ways to setup routing point:
1.
Tap-and-hold on main map.
2.
Tap-and-hold in ‘My Favorite’ page.
3.
Tap-and-hold from search result.
《
Figure4-1-1a
》
Tap-and-hold on main map
