.
Maple Systems Inc., 808 134th Street SW, Suite 120, Everett, WA 98204-7333 – www.maplesystems.com
1036-0203
Page 1 of 4
Rev. 01, 10/11/2015
CONTROLLER INFORMATION SHEET
Maple Model(s) PLC or Controller
Graphic HMIs Siemens S7-200 SMART (PPI)
P/N: 1036-0203
Rev. 01 Date: 10/11/2015
Summary
Maple Systems Graphic HMIs
communicate with Siemens S7-200 SMART modules via PPI.
When configured with EZware, the Graphic HMI is the master in a point-to-point single
master, single slave format. Please refer to the
Installation and Operations Manual
for
information on connecting multiple Graphic HMIs to a single PLC port.
Communications Cable
The Graphic HMI should be connected to the controller’s PPI port
.
A list of communications
cables offered by Maple Systems as well as cable assembly instructions to assist you in
assembling your own communications cable are available on our website at
www.maplesystems.com.
WARNING
If your communications cable is not wired exactly as shown in our cable
assembly instructions, damage to the HMI or loss of communications can
result.
PLC Controller Settings
The PLC station number cannot be the same as the HMI station number.
