OMI Operations Manual: OMI6800 Series
29
OMI Operations Manual: OMI6800 Series
29
SETTING COM1 FUNCTION
1. Using a #1 Phillips screwdriver, remove
the 2 Phillips screws indicated in the
figure.
2. Remove the storage cover by lifting it out
of the unit.
3. Using a #1 Phillips screwdriver, remove
the 1 screw retaining the storage bracket.
Then carefully slide the bracket out of the
unit.
4. The DIP switches are now visible.
5.
Reference the “COM1 Function Switch
Setting” label and/or the following chart to
set the DIP switches to the desired RS-
232, RS-422, or RS-485 communication
mode.
Function
S_422
(switches 1-5)
S_232
(all switches)
RS232 (Default)
OFF
ON
RS422
ON
OFF
RS485
ON
OFF
6. Slide the bracket and storage device into
the OMI, securing it with the screw
removed in step 3.
