Operations Manual: OMI6900BP Series 4
Operations Manual: OMI6900BP Series 4
SAFETY PRECAUTIONS
Please observe the following precautions when installing the OMI6900BP Series Panel PCs. Failure to comply with
these restrictions could result in loss of life, serious personal injury, or equipment damage.
Warning:
Disconnect this equipment from any power before cleaning. Do not use liquid or
spray detergents for cleaning. Use a damp cloth.
Warning:
Keep this equipment away from humidity.
Warning:
Before applying power to the unit make sure the voltage of the power source is
within the input voltage rating of the unit.
Warning:
Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
Warning:
Never open the equipment and do not operate equipment with its back cover
removed- there are dangerous high voltages present inside. For safety reasons, the
equipment should be opened only by a qualified service technician.
Warning:
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instruction manual, it may cause interference
to radio communications. It has been tested and found to comply with the limits for a Class
A computing device pursuant to FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial environment. Operation
of this equipment in a residential area is likely to cause interference in which case the user
at his own expense will be required to take whatever measures may be required to correct
the interference.
Warning:
If any of the following situations arise, get the equipment checked by qualified
service personnel.
•
The power cord or plug is damaged.
•
Liquid has penetrated into the equipment.
•
The equipment has been exposed to moisture.
•
The equipment does not work well, or you cannot get it to work according to this manual.
•
The equipment has been dropped and damaged.
•
The equipment has obvious signs of breakage.
Warning:
Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -30°C (-22°F) or above 70°C (158°F). It may damage the equipment.
