5
6
7
Ø8
cap nut
Foot board
pole
Foot board
Fender
Front wheel
assembly
M6x20
bolt
Side wheel
HOLE
Assembly Steps
●
Fit and hold the side wheel against the
vehicle body.
●
Insert two
M6x20 bolt
through the side
wheel and into the vehicle body.
●
Tighten the bolts with a spanner. DO
NOT over tighten.
●
Repeat for the other side.
●
Fit a
Ø8 cap nut onto the end of the
foot board pole with a hummer.
●
Fit and hold the foot board against the
vehicle body. Make sure the foot board
match to the vehicle body.
●
Insert the foot board pole through the
hole in the foot board and the hole in the
vehicle body.
●
Fit the other foot board onto the foot
board pole.
●
Fit the other
Ø8 cap nut onto the end
of the foot board pole with a hummer.
●
Fit the fender to the front wheel
assembly.
●
Push until you hear it click into place.
