THR/VAR Pot
Gain at 65Hz
MAX
+18.4dBu
Grid 9
Grid 8
Grid 7
Grid 6
Grid 5
Grid 4
Grid 3
Grid 2
Grid 1
MIN
+18.4dBu
+17.5dBu
+16dBu
+14.5dBu
+12.5dBu
+11dBu
+7.5dBu
+1dBu
+0.0dBu(Bypass)
+0.0dBu(Bypass)
Note that when the Sub Harmonic Synthesizer is active need to tune properly
the Input level so to take in account the added Sub Harmonic Process'
Amplitude on the low frequencies, and notified by the Clip Led blinking.
IMPORTANT NOTE
: Once the CLP160 is configured by the user in all its
parameters, when the unit will be turned OFF, the all values of the parameters
will be retained and recalled when the unit will be turned ON again.
The parameters' set value will not change until, once assigned the THR/VAR
potentiometer to one of them, through the “Stk/Rel Select” and “Atk/Rel
Confirm” proper combination, the THR/VAR potentiometer will be moved
again, so forcing the unit to update the current parameter's value with the new
one corresponding to the new THR/VAR potentiometer's position.
17
TAB 6
Summary of Contents for CLP-160
Page 1: ...19 482mm DIGITAL USB...