Power does not turn on / Power is turned off
Power is not turned on.
0
Check whether the power plug is correctly inserted into the power outlet. (
0
This unit is in standby mode. Press the CD
X
button on the remote control. (
Power automatically turns off.
0
The auto standby mode setting is on. The auto standby mode automatically switches the unit to standby if there are no operations for more than 30
minutes. To disable the Auto Standby mode, set “Auto-Standby” on the menu to “Off”. (
The power turns off and the protection circuit indicator shows one long blink and three short blinks in orange.
0
The protection circuit has been activated due to an error in the internal power supply. Unplug and reinsert the power cord, then press the
X
button to
turn on the power again. If the problem is not solved by turning the power off and on again, unplug the power cord and contact our customer service
center.
41