Marantz 541110331126M User Manual Download

Page: 16 / 54

Connections

ENGLISH

od
uctio

Co
nnections

Playback

nction Setup

thers

Press

[HDMI RESOLUTION]

to select the HDMI output mode. HDMI video resolution changes as

following.

When using HDMI connections make the “HDMI Audio Out” settings in the “Audio” menu on the
setup menu according to the specifications of the device or monitor to be connected.

䡵

Audio signals output from HDMI OUT

HDMI Output Mode and Actual Output Signals

Front Panel Display

HDMI Video Resolution

480 Interlaced

Press [HDMI RESOLUTION]

480 Progressive

Press [HDMI RESOLUTION]

720 Progressive

Press [HDMI RESOLUTION]

1080 Interlaced

Press [HDMI RESOLUTION]

1080 Progressive

Press [HDMI RESOLUTION]

1080 Progressive 24 frame

Press [HDMI RESOLUTION]

Source Direct

Press [HDMI RESOLUTION]

Note

• You can change the HDMI output mode with

[HDMI RESOLUTION]

during playback as well. (This

is not available during BD/AVCHD playback.)

• Video and audio signals may be distorted temporarily when switching to/from the HDMI output mode.
• You can also change the HDMI output mode from “HDMI Video Resolution” in the “Video” menu

on the setup menu. Refer to page 32.

• In order to get natural and high quality film reproduction of 24-frame film material, use HDMI

cable (High Speed HDMI cable is recommended) and select “1080p24”, “Auto” or “Source Direct”
if the connected display device is compatible with 1080p24 frame input.

• For AVCHD and DivX

, 24-frame film material will be output as 60 frame, even if the connected

device is compatible with 1080p24 frame input and “HDMI Video Resolution” is set to “1080p24”,
“Auto” or “Source Direct”.

• When “HDMI Video Resolution” is set to “1080p”, “1080p24” or “Source Direct”, the “Component

Output” will be set to “480i” automatically.

• If the video is not properly from HDMI OUT jack after you set the “HDMI Video Resolution” setting,

change the HDMI video resolution to the compatible resolution by pressing

[HDMI RESOLUTION]

or press and hold

on the front panel for more than 5 seconds to reset

the setting.

• “HDMI Deep Color” is available only when the display device is connected by HDMI cable and

supports HDMI Deep Color.

• For “Auto” in “HDMI Deep Color”, using the High Speed HDMI cable is recommended.

Audio Setting

Device to be connected

“HDMI Audio Out” setting

Output HDMI audio signal

Device compatible with DTS,
DTS-HD, Dolby Digital, Dolby
Digital Plus or Dolby TrueHD
decoding

HDMI Multi(Normal)

Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS, or DTS-HD
bitstream are output from HDMI
OUT. Make the speaker settings on
the connected AV amplifier, etc.

Device compatible with 3 or
more channels of audio inputs
(not DTS, DTS-HD, Dolby Digital,
Dolby Digital Plus or Dolby
TrueHD compatible)

HDMI Multi(LPCM)

Multi-channel audio signals are
output from the HDMI OUT. Make
the speaker settings with the
speaker setting items appear after
you select “HDMI Multi(LPCM)”.
Refer to page 33.

Device compatible with
2-channel audio input or device
not compatible with audio input

HDMI 2ch

Down-mixed 2-channel audio
signals are output from HDMI
OUT.

HDMI connection to a display
device, and digital audio
connection (coaxial) to an AV
amplifier.

Audio Mute

HDMI audio will be muted, and
Dolby Digital/DTS bitstream or
PCM will be output from DIGITAL
OUT depending on the “Digital
Out” setting. Refer to page 14.

Disc type

Audio recording

format

“HDMI Audio Out” setting

HDMI Multi(Normal)

HDMI Multi(LPCM)

HDMI 2ch

BD-Video

Dolby Digital

Multi PCM

2ch Downmix PCM

Dolby Digital Plus Dolby Digital Plus*