Marantz AV7702 Owner'S Manual Download

Page: 217 / 343

When “Height Speakers” is set to “Using Dolby Speakers”

Select the height channels used for the two pair.

AUDIO OUT connectors

Select items

HEIGHT1

HEIGHT2

Front Dolby

(Default)

Front Dolby

Not assigned.

Surround Dolby

Surround Dolby

Not assigned.

Back Dolby

Back Dolby

Not assigned.

Front Dolby & Top Rear

Front Dolby

Top Rear

Front Dolby & Rear Height

Front Dolby

Rear Height

Front Height & Surr. Dolby

Front Height

Surround Dolby

Front Height & Back Dolby

Front Height

Back Dolby

Top Front & Surr. Dolby

Top Front

Surround Dolby

Top Front & Back Dolby

Top Front

Back Dolby

Front Dolby & Surr. Dolby

Front Dolby

Surround Dolby

Front Dolby & Back Dolby

Front Dolby

Back Dolby

Wide/Height2

Select the channel that is output from the FRONT WIDE/HEIGHT2

BALANCED XLR PRE OUT connectors.

Front Wide

(Default)

Outputs the front wide channel from the FRONT WIDE/

HEIGHT2 BALANCED XLR PRE OUT connectors.

Top Rear

Outputs the channel assigned for HEIGHT2 from the

FRONT WIDE/HEIGHT2 BALANCED XLR PRE OUT

connectors.

For the front wide channel, use the UNBALANCED RCA

PRE OUT connectors.

The displayed selection shows the channel name assigned for HEIGHT2 in the

“Height Layout” setting.

In some settings, “Wide/Height2” may not be available.

Contents

Connections

Playback

Settings

Tips

Appendix

217

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for AV7702
























































































































































































































































































































































Search results

Summary of Contents for AV7702

Reviews:

Related manuals for AV7702

Brands by name

Popular brands

Marantz AV7702, Owner'S Manual

Search results

Summary of Contents for AV7702

Reviews:

Related manuals for AV7702

Brands by name

Popular brands