Trigger Out 1 / Trigger Out 2
Select the conditions for activating trigger out.
For details about how to connect the DC OUT jacks, see “DC OUT
jacks” (
v
p. 71).
n
When setting for zone (MAIN ZONE / ZONE2 /
ZONE3)
Trigger out is activated through linkage to the power of the zone set to
“On”.
n
When setting for input source
Activates trigger out when the input source set to “On” is selected.
n
When setting for HDMI monitor
Activates trigger out when the HDMI monitor set to “On” is selected.
On:
Activate trigger on this mode.
– – –:
Do not activate trigger on this mode.
Auto Standby
Set so the unit power automatically switches to standby.
o
MAIN ZONE
Sets the time for switching to auto standby when there are no audio or
video signals input into this unit.
Before the unit enters standby mode, “Auto Standby” is displayed on
the unit display and the menu screen.
60 min:
The unit goes into standby after 60 minutes.
30 min:
The unit goes into standby after 30 minutes.
15 min:
The unit goes into standby after 15 minutes.
Off
(Default)
:
The unit does not go into standby
automatically.
o
ZONE2 / ZONE3
When there are no operations for a certain period of time as set here,
the power is automatically shut off even if there is audio or video input.
8 hours:
Switches ZONE2/ZONE3 the standby state
after about 8 hours.
4 hours:
Switches ZONE2/ZONE3 to the standby
state after about 4 hours.
2 hours:
Switches ZONE2/ZONE3 to the standby
state after about 2 hours.
Off
(Default)
:
Does not automatically switch ZONE2/
ZONE3 to the standby state.
Contents
Connections
Playback
Settings
Tips
Appendix
245
Front panel
Display
Rear panel
Remote
Index
