Marantz AV7702 Owner'S Manual Download

Page: 250 / 343

Add New Feature

Display new features that can be downloaded to this unit and perform

an upgrade.

Upgrade

Package:

Display the items to be upgraded.

Upgrade

Status:

Display a list of the additional functions provided by

the upgrade.

Upgrade Start:

Execute the upgrade process.

When the upgrade starts, the menu screen is shut

down. During the upgrade, the amount of upgrade

time which has elapsed is displayed.

See the Marantz website for details about upgrades.

When the procedure is complete, “Registered” is displayed in this menu and

upgrades can be carried out. If the procedure has not been carried out, “Not

Registered” is displayed.

The ID number shown on this screen is needed when carrying out the

procedure.

The ID number can also be displayed by pressing and holding the main unit’s

and SETUP for at least 3 seconds.

If the upgrade is not successful, an error message identical to those in

“Firmware”

“Update” will appear on the display. Check the settings and

network environment and then perform the upgrade again.

Notes concerning use of “Update” and “Add New Feature”

In order to use these functions, you must have the correct system

requirements and settings for an Internet connection. (

p. 68)

Do not turn off the power until updating or upgrading is completed.

Approximately 1 hour is required for the updating/upgrading procedure

to be completed.

Once updating/upgrade starts, normal operations on this unit cannot

be performed until updating/upgrading is completed. Furthermore,

there may be cases where backup data is reset for the parameters,

etc., set on this unit.

If the update or upgrade fails, press and hold the

on the main unit for

more than 5 seconds, or remove and re-insert the power cord. “Update

Retry” appears on the display and update restarts from the point at

which update failed. If the error continues despite this, check the

network environment.

Information regarding the “Update” function and “Add New Feature” will be

announced on the Marantz web site each time related plans are defined.

Contents

Connections

Playback

Settings

Tips

Appendix

250

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for AV7702
























































































































































































































































































































































Search results

Summary of Contents for AV7702

Reviews:

Related manuals for AV7702

Brands by name

Popular brands

Marantz AV7702, Owner'S Manual

Search results

Summary of Contents for AV7702

Reviews:

Related manuals for AV7702

Brands by name

Popular brands