Marantz AV7702 Owner'S Manual Download

Page: 269 / 343

Power does not turn on / Power is turned off

Symptom

Cause / Solution

Page

Power does not turn on.

Check whether the power plug is correctly inserted into the power outlet.

Power automatically turns

off.

The sleep timer is set. Turn on the power again.

152

“Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To

disable “Auto Standby”, set “Auto Standby” on the menu to “Off”.

245

Power turns off and the

power indicator flashes in

red approx. every 2

seconds.

Please re-install this unit in a place having good ventilation.

－

Power turns off and the

power indicator flashes in

red approx. every 0.5

seconds.

Turn down the volume and turn on the power again.

This unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center.

－

The power to this unit does

not turn off when you press

the Power operation

button. “ZONE2 On” or

“ZONE3 On” appears on

the display.

Power in either ZONE2 or ZONE3 is on. To turn off the power of the device (standby), press either the

ZONE2 ON/OFF or ZONE3 ON/OFF button on the main unit, or press the POWER

button after

pressing the Z2 or Z3 button on the remote control to turn off the power of ZONE2 or ZONE3.

－

Contents

Connections

Playback

Settings

Tips

Appendix

269

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for AV7702
























































































































































































































































































































































Search results

Summary of Contents for AV7702

Reviews:

Related manuals for AV7702

Brands by name

Popular brands

Marantz AV7702, Owner'S Manual

Search results

Summary of Contents for AV7702

Reviews:

Related manuals for AV7702

Brands by name

Popular brands