Marantz AV7702mk2 Owner'S Manual Download

Page: 206 / 361

Audyssey LFC™

Adjusts the low frequency band to prevent bass and vibration from

being conveyed to neighboring rooms.

On:

Use “Audyssey LFC™”.

Off

(Default)

Do not use “Audyssey LFC™”.

Containment Amount

Adjusts the amount of low frequency containment. Use higher settings

if you have close neighbors.

1 – 7

(Default : 4)

This can be set when “Audyssey LFC™” in the menu is set to “On”.

Audyssey DSX

Provides more immersive surround sound by adding the new

channels.

Wide:

Turn on Audyssey DSX

processing for

front wide channel expansion.

Height:

Turn on Audyssey DSX

processing for

front height channel expansion.

Wides/Heights:

Turns on Audyssey DSX

processing for

front wide and front height channel

expansion.

Off

(Default)

Do not set “Audyssey DSX

”.

“Audyssey DSX

” can be set when you are using front height speakers or front

wide speakers.

“Audyssey DSX

” is only valid when using a center speaker.

When 2-channel signals are being played back, “Audyssey DSX

” cannot be

used.

“Audyssey DSX

” cannot be configured if the HD Audio source being played

includes Front height and Front wide channels. In this case, the respective

channels are played back using the input signals.

This can be set by pressing A-DSX on the main unit.

Contents

Connections

Playback

Settings

Tips

Appendix

206

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for AV7702mk2









































































































































































































































































































































































Search results

Summary of Contents for AV7702mk2

Reviews:

Related manuals for AV7702mk2

Brands by name

Popular brands

Marantz AV7702mk2, Owner'S Manual

Search results

Summary of Contents for AV7702mk2

Reviews:

Related manuals for AV7702mk2

Brands by name

Popular brands