o
Connect Using
Select the method for connecting to the home network (LAN).
Wired (Ethernet):
Use a LAN cable to connect to a network.
Wireless (Wi-Fi):
Use the wireless LAN (Wi-Fi) function to
connect to a network.
0
This can be set when “Wi-Fi” is set to “Enabled”. (
Wi-Fi Setup
Connect to a wireless LAN (Wi-Fi) router.
The router can be connected in the following ways. Select the connection
method to suit your home environment.
o
Scan Networks
Select the network you wish to connect to from the list of possible
networks shown on the TV screen.
1.
Select the network you wish to connect to from the list of wireless
networks.
Select “Rescan” if the network cannot be found.
2.
Enter your password and select “OK”.
o
Use iOS Device
Use your iOS device (iPhone/iPod/iPad) to connect to the network. By
connecting your iOS device to this unit, the unit can be automatically
connected to the same network as your device.
This unit can be connected to your iOS device in two ways, using a
USB cable and using Wi-Fi.
260
