Marantz AV7702mkII Owner'S Manual Download

Page: 292 / 362

Specifying the zone used with the remote control unit

ENTER

SET

ZONE

SELECT

When the ZONE SELECT is pressed, only the set zone can be operated

with the remote control unit.
This is useful for preventing mistaken operation.

The factory setting is “M23”.

Press and hold ZONE SELECT and SET for at least 3

seconds.

Use

to set the zone to be used and press ENTER.

“SET” flashes four times on the remote control unit and the normal

operation mode is restored.

Remote control unit display

Zone to be used

MAIN ZONE only

MAIN ZONE / ZONE2

M23

MAIN ZONE / ZONE2 / ZONE3

292

Summary of Contents for AV7702mkII










































































































































































































































































































































































Search results

Summary of Contents for AV7702mkII

Reviews:

Related manuals for AV7702mkII

Brands by name

Popular brands

Marantz AV7702mkII, Owner'S Manual

Search results

Summary of Contents for AV7702mkII

Reviews:

Related manuals for AV7702mkII

Brands by name

Popular brands