54
ENGLISH
No sound from the DIGITAL OUT (optical or coaxial)
jacks.
The
[Digital Out]
menu is set to
[Off]
.
Set the
[Digital Out]
(
Audio 1
menu) to
[On]
(
page 25
).
Audio is not output or is distorted.
The Setup screen
Audio 1
menu
[
96 kHz PCM Out
]
setting is set to
[
96 kHz
]
. Digital output is prohibited on
some discs.
\
Be sure to make analog audio connections as well as
digital connections (
page 13
).
The disc is dirty.
\
Refer to
‘Disc Care’
(
page 48
).
The connection plugs are not inserted fully into the
terminals or are not connected.
\
Check that all connection plugs are firmly inserted.
The connection plug or terminal is dirty.
\
Check that the plugs and terminals are wiped clean of
dirt, etc.
Audio cable connection is wrong.
\
Check to make sure that the audio cables are
connected correctly (
page 13
).
Connection is made to the stereo amplifier‘s PHONO input
terminal.
\
Change connection to any input terminal except
PHONO.
The pause mode is engaged.
\
Press
PLAY
3
to exit the pause mode.
Stereo amplifier operation is incorrect.
\
Check input (CD, AUX, etc.) selector to determine if it
is selected for DVD playback.
The DVD or CD is recorded in DTS audio.
\
DTS audio is only output from the digital output jacks.
Connect the digital output on the player to the digital
input on a receiver or amplifier with a built in DTS
decoder to hear DTS audio.
Noticeable difference in DVD and CD volume.
DVDs and CDs use different recording methods.
\
This is not a malfunction.
Caution
Static electricity or other external influence may cause
malfunctioning of this unit. In this case, unplugging the
power cord and then re-plugging it in will usually reset the
unit for proper operation. If this does not correct the
problem, please consult your nearest MARANTZ service
center.
