19
1. Initialization for the factory mode
Backup data initialization is carried out. See Initialization Items.
After initialization, move on to nomal mode.
CAUTION
Version information (such as rewriting failed log) Clear.
Clear the history of protection.
Operation
While holding down buttons "
CURSOR
d
" and "
INPUT
" simultaneously, insert the AC plug into the wall outlet to turn on the
power.
d
Startup display
All lights display (2 seconds) - All off display (2 seconds)
Lighting of all LEDs on the unit (4 second)
"
Factory Reset
" displayed for 5 seconds.
Initialization Items (Default setting)
Setting
Source
Internet Radio
DIMMER
100%
Sleep
OFF
REPEAT/RANDOM
OFF
Favorite list
Clear all
iPod mode
Remote Mode
Setup Menu/Network
Set to Initial value, all
Protection history
NO PROTECT
Version up information
Clear all
2. Owner’s Manual described initialization mode (User Reset)
Backup data initialization is carried out. Refer to Initialization Items.
After initialization, move on to nomal mode.
CAUTION
The differences between this operation and restoring the factory default are as follows.
• Does not clear the version information such as rewriting failed log.
• Does not clear the history of protection.
• Network devices are started and initialized
d
Operation
In "
STANDBY
" status, press and hold the "
CURSOR
f
" and "
8
" buttons along with the power operation button to turn
on the power.
Startup display
"Initialized" displayed for 5 seconds.
Wait for more than 90 seconds after "
Initialized
" is displayed and then turn the power off.
d
(During this time, start and initialize the network devices.)
Summary of Contents for NA6005
Page 8: ...Personal notes 8 ...
Page 30: ...Personal notes 30 ...
Page 39: ...BLOCK DIAGRAM 39 ...
Page 40: ...POWER DIAGRAM 40 ...
