B
Click the “Advanced” tab.
C
Select the sampling rate and bit rate to be applied to the D/A
converter.
0
It is recommended that “2 channel, 24 bit, 192000 HZ (Studio
Quality)” is selected.
D
Click “Apply”.
E
Click “Test”.
0
Check that audio from this unit is output from the PC.
.
Apply
Cancel
Test
OK
2 channel, 24 bit, 192000 H
z (
Studio Quality
)
Give exclusive mode applications priority
Default Format
Select the sample rate and bit depth to be used when running
in shared mode.
Digital Audio Interface Properties
Allow applications to take exclusive control of this device
Apply
Restore Defaults
Restore Defaults
General
Supported Formats
Levels
Advanced
2 channel, 24 bit, 44100 H
z (
Studio Quality
)
2 channel, 24 bit, 48000 H
z (
Studio Quality
)
2 channel, 24 bit, 96000 H
z (
Studio Quality
)
2 channel, 24 bit, 192000 H
z (
Studio Quality
)
w
e
r
t
NOTE
0
The dedicated driver must be installed in the PC before this unit is connected to a
PC. Operation will not occur correctly if connected to the PC before the dedicated
driver has been installed. Moreover, if the PC is running Windows XP as its OS,
the PC’s speed will decrease significantly, and a PC restart may be required.
0
Operation may fail in some PC hardware and software configurations.
Contents
Connections
Playback
Settings
Tips
Appendix
81
Front panel
Rear panel
Remote control
unit
Index