n
Audio section
• Power amplifier
Rated output:
Front:
50 W + 50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
60 W + 60 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
60 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
50 W + 50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
60 W + 60 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
• Analog
Input sensitivity/Input impedance:
130 mV/47 kΩ/kohms
Frequency response:
10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N :
98 dB (IHF–A weighted, DIRECT mode)
n
Video section
• Standard video connectors
Input/output level and impedance:
1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz – 10 MHz — 0, –3 dB
• Color component video connector
Input/output level
and impedance:
Y signal — 1 Vp-p, 75 Ω/ohms
PB / CB signal — 0.7 Vp-p, 75 Ω/ohms
PR / CR signal — 0.7 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz – 60 MHz — 0, –3 dB
n
Tuner section
(Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10–15 W)
Receiving Range:
FM 87.5 MHz – 107.9 MHz
AM 520 kHz – 1710 kHz
Usable Sensitivity:
FM 1.2 μV (12.8 dBf)
AM 18 μV
50 dB Quieting
Sensitivity:
MONO
2.8 μV (20.2 dBf)
S/N :
MONO
70 dB (IHF–A weighted, DIRECT mode)
STEREO 67 dB (IHF–A weighted, DIRECT mode)
Total harmonic
Distortion:
MONO
0.7 % (1 kHz)
STEREO 1.0 % (1 kHz)
n
General
Power supply:
AC 120 V, 60 Hz
AC 230 V, 50/60 Hz
Power consumption:
180 W
Power consumption in standby mode:
0.2 W
Power consumption in CEC standby mode:
0.5 W
Power consumption in network standby mode:
2.7 W
Unit : in. (mm)
12 15/16 (328.5)
14 29/64 (367.0)
8 55/64 (225.0)
2 3/16
(55.5)
1 57/64
(48.0)
37/64 (14.5)
3 9/16 (90.5)
4 9/64 (105.0)
17 21/64 (440.0)
13 25/64 (340.0)
2 11/64
(55.0)
1 31/32
(50.0)
1 31/32
(50.0)
5/8
(16.0)
57/64
(22.5)
Weight : 18 lbs 1 oz (8.2 kg)
DIMENSION
TECHNICAL SPECIFICATIONS
10
