Marantz NR1506 Owner'S Manual Download

Page: 157 / 242

Error messages

An error message is displayed if Audyssey

Setup could not be completed due to speaker placement, the measurement environment, etc. If an error

message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections.

Examples

Error details

Measures

No speakers found.

Sound calibration microphone is not

detected.

Connect the included Sound calibration microphone to the

SETUP MIC jack of this unit.

Not all speakers could be detected.

Check the speaker connections.

Ambient noise is too high or level is too

low

There is too much noise in the room.

Either turn off any device generating noise or move it away.

Perform again when the surroundings are quieter.

Speaker or subwoofer sound is too low.

Check the speaker installation and the direction in which the

speakers are facing.

Adjust the subwoofer’s volume.

Front R : None

The displayed speaker could not be

detected.

Check the connections of the displayed speaker.

Front R : Phase

The displayed speaker is connected with the

polarity reversed.

Check the polarity of the displayed speaker.

For some speakers, this error message may be displayed

even if the speaker is properly connected. If you are sure the

connection is correct, press

to select “Ignore”, then press

ENTER.

Contents

Connections

Playback

Settings

Tips

Appendix

157

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for NR1506


















































































































































































































































Search results

Summary of Contents for NR1506

Reviews:

Related manuals for NR1506

Brands by name

Popular brands

Marantz NR1506, Owner'S Manual

Search results

Summary of Contents for NR1506

Reviews:

Related manuals for NR1506

Brands by name

Popular brands