Marantz NR1506 Owner'S Manual Download

Page: 200 / 242

Cannot connect to a wireless LAN network

Symptom

Cause / Solution

Page

Cannot connect to the

network.

The network name (SSID), password and encryption setting have not been set up correctly. Configure the

network settings according to the setting details of this unit.

168

Shorten the distance from the wireless LAN access point and remove any obstructions to improve access

first before re-connecting again. Place the unit away from microwave ovens and other network access

points.

－

Configure the access point channel settings away from channels that are being used by other networks.

－

This unit is not compatible with WEP (TSN).

－

Cannot connect to WPS.

Check that the WPS mode of the router is operating.

－

Press the WPS button on the router and then press the “Connect” button displayed on the TV within 2

minutes.

－

A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to

“None”, “WPA-PSK (AES)” or WPA2-PSK (AES).

168

If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the WPS

button. In this case, use the “Scan Networks” or “Manual” method to connect.

－

Cannot connect to the

network using iPhone/iPod

touch/iPad.

Update the iPhone/iPod touch/iPad firmware to the latest version.

－

When using a USB cable to configure the settings, the iOS device firmware version needs to support iOS

5 or later. When configuring the settings via a wireless connection, iOS 7 or later needs to be supported.

－

Contents

Connections

Playback

Settings

Tips

Appendix

200

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for NR1506


















































































































































































































































Search results

Summary of Contents for NR1506

Reviews:

Related manuals for NR1506

Brands by name

Popular brands

Marantz NR1506, Owner'S Manual

Search results

Summary of Contents for NR1506

Reviews:

Related manuals for NR1506

Brands by name

Popular brands