Marantz NR1608 Owner'S Manual Download

Page: 153 / 284

Dynamic Volume

Solves the problem of large variations in volume level between TV,

movies and other content (between quiet passages and loud

passages, etc.) by automatically adjusting to the user’s preferred

volume setting.
Works with MultEQ

Heavy:

Most adjustment to softest and loudest

sounds.

Medium:

Medium adjustment to loudest and

softest sound.

Light:

Least adjustment to loudest and softest

sounds.

Off

(Default):

Do not use Dynamic Volume.

If “Dynamic Volume” is set to “Yes” in “Audyssey

Setup”, the setting is

automatically changed to “Medium”. (

p. 172)

Graphic EQ

Uses the graphic equalizer to adjust the tone of each speaker.

Speakers for which “Graphic EQ” can be set differ according to the sound mode.

This can be set when “MultEQ

” setting is “Off”. (

p. 151)

This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.

If you are using headphones, you can set the equalizer for headphones.

(

p. 153)

Graphic EQ / Headphone EQ

Set whether to use the graphic equalizer or not.

On:

Use the graphic equalizer.

Off

(Default):

Do not use the graphic equalizer.

“Headphone EQ” is set in the menu when headphones are used.

153

Summary of Contents for NR1608




























































































































































































































































































Search results

Summary of Contents for NR1608

Reviews:

Related manuals for NR1608

Brands by name

Popular brands

Marantz NR1608, Owner'S Manual

Search results

Summary of Contents for NR1608

Reviews:

Related manuals for NR1608

Brands by name

Popular brands