Trigger Out
Select the conditions for activating trigger out.
For details about how to connect the DC OUT jack, see “DC OUT
n
When setting for zone (MAIN ZONE / ZONE2)
Trigger out is activated through linkage to the power of the zone set to
“On”.
n
When setting for input source
Trigger out is activated through linkage to the power of the zone set to
“On”.
0
It is valid for the zone, which is set to “On” and “When setting for zone”.
On:
Activate trigger on this mode.
– – –:
Do not activate trigger on this mode.
Front Display
Makes settings related to the display on this unit.
o
Dimmer
Adjust the display brightness of this unit.
Bright
(Default):
Normal display brightness.
Dim:
Reduced display brightness.
Dark:
Very low display brightness.
Off:
Turns the display off.
0
You can also adjust the display by pressing DIMMER on the main unit.
206