background image

M-DAX

Compressed audio formats such as MP3, WMA (Windows Media Audio)

and MPEG-4 AAC reduce the amount of data by eliminating signal

components that are hard for the human ear to hear. The “M-DAX”

function generates the signals eliminated upon compression, restoring the

sound to conditions near those of the original sound before compression.

It also restores the original bass characteristics for a rich and expanded

tonal range.

o

Mode

High:

Optimized mode for compressed sources

with very weak highs (64 kbps and

under).

Medium:

Apply suitable bass and treble boost for

all compressed sources (96 kbps and

under).

Low:

Optimized mode for compressed sources

with normal highs (96 kbps and over).

Off:

Do not use “M-DAX”.

0

The M-DAX indicator lights.

0

This item can be set with analog signals or PCM signal (Sample Rate =

44.1/48 kHz) is input.

0

This item default setting for “HEOS Music” is “Low”. All others are set to “Off”.

0

This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.

0

“M-DAX” settings are stored for each input source.

0

This can also be set by pressing M-DAX on the main unit.

Contents

Connections

Playback

Settings

Tips

Appendix

157

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for NR1711























































































































































































































































































































Reviews: