4
Setup
Items not listed under
Introduction
>
Box Contents
are sold separately.
To set up PHA3 with your sound system:
1.
Use the included power adapter to connect PHA3 to a power outlet.
Alternatively, remove the cover to this battery compartment to install 2 AA batteries in it.
Insert the positive (
+
) end of the battery first.
2.
Use standard XLR cables to connect your audio sources to the
line inputs
.
You can also connect audio sources to the
Stereo
/
Loop In
using the included 1/4”-to-1/8”
(6.35 mm to 3.5 mm) TRS cable or a standard 1/4” (6.35 mm) TRS cable.
3.
Connect 1/4” (6.35 mm) stereo headphones to the
outputs
. Channel 1 can also accept 1/8”
(3.5 mm) stereo headphones.
4.
Power on all of your audio sources (mixer, stereo, etc.).
5.
Power on PHA3. To use the power adapter, set the
power switch
to
Ext
. To use batteries,
set it to
Batt
.
Example 1
This is an example of a basic way to use PHA3.
Right Panel
Left Panel
Smartphone, tablet,
computer, etc.
Headphones