4
Rear Panel
1
2
9
3
4
5
6
7
8
1.
Audio Outputs
(
balanced, XLR
)
:
These outputs send the audio signal to your external speakers,
receiver, etc. Use XLR cables to make these connections.
2.
Audio Outputs
(
unbalanced, RCA
)
:
These outputs send the audio signal to your external speakers,
receiver, etc. Use RCA cables to make these connections.
3.
Composite Video Output:
This output sends the video signal to your TV, display, etc. Use a standard
RCA composite video cable to make this connection.
4.
Component Video Output:
These outputs send the video signal to your TV, display, etc. Use standard
RCA component (Y/Pb/Pr) video cables to make these connections.
5.
Coaxial Output:
This output sends the digital audio signal to your TV. Use a standard coaxial cable to
make this connection.
6.
HDMI Output:
This output sends an HDMI audio and video signal from an external device. Use a
standard HDMI cable to make this connection.
7.
Digital Optical Audio Output:
This output sends the audio signal to your TV, receiver, etc. Use a
digital optical TOSLINK cable (IEC60958 Type II S/PDIF compatible) to make this connection.
8.
Remote Input:
This input lets you connect a host device (usually a computer) to PMD-500D. You can
use the host device to control PMD-500D via commands sent from it (using RS-232C serial
communication). Use a 9-pin D-Sub cable to make this connection.
Note:
to download the serial protocol guide for PMD-500D.
9.
AC In:
Use the included power cable to connect this input to a power outlet.
See
for more information.
Summary of Contents for PMD-500D
Page 97: ...97 ...
Page 100: ...marantzpro com Manual Version 1 2 ...
