19
Playback Setup
•
Power On Mode
o
Repeat:
When set to
On
, a disc will automatically repeat when it starts playing. When set to
Off
, you will have to set the repeat mode using the front panel or remote control.
o
DVD
/
CD Auto Play:
When set to
On
, a disc will start playing automatically after you insert it.
When set to
Off
, you will have to start disc playback manually after inserting it.
•
Setting
o
Auto Resume:
When set to
On
, PMD-500D will “remember” where you stop playing a disc.
When you start playing that disc again, you can choose to start from that point or from the
beginning of the disc. PMD-500D can do this for up to 5 discs, replacing the oldest one if it
needs to remember a new one. When set to
Off
, this feature is disabled.
•
Language
o
OSD:
The language of the text shown in PMD-500D’s menus, screens, windows, etc.
o
Disc Menu:
The language of the text shown in disc menus. The disc must be able to display
the selected language for this feature to work properly.
o
Audio:
The language of the audio on a disc. The disc must be able to play audio in the selected
language for this feature to work properly.
o
Subtitle:
The language of the subtitles shown during video playback. The disc must have
subtitles for the selected language for this feature to work properly.
•
Parental Control
o
Ratings:
Select the highest rating that can be viewed:
Kid Safe
,
G
,
PG
,
PG-13
,
PGR
,
R
,
NC-
17
, or
Adult
. When a disc or video file does not include rating information, no content is
restricted. You will need to enter the Password to change the rating.
o
Change Password:
Select this to change the parental control password, which must be 4
digits. Use the
number buttons
(
0
–
9
) to enter a number. (You must enter the current password
first. You must also enter the new password twice to ensure you entered it correctly.)
Video Setup
•
Output Setting
o
Video Adjust:
Press
OK
to edit
Sharpness
,
Brightness
,
Contrast
,
Gamma
,
Hue
, and
Saturation
. Use the
left
/
right
cursor buttons
(
) to adjust the sliders. For Sharpness, select
High
,
Medium
, or
Low
. For Gamma, select
None
,
Low
,
Medium
, or
High
. Press the left cursor
to return to the previous screen.
o
TV Aspect Ratio:
Select the desired aspect ratio:
4:3
Pan & Scan
,
4:3 Letterbox
,
16:9 Wide
,
Wide Squeeze
.
o
TV System:
Select the broadcasting standard for your location:
NTSC
,
PAL
, or
Multi-system
.
By default, this should already be set to the correct format for your location. Select
Multi-
system
only if your TV supports both NTSC and PAL systems.
o
Resolution:
Select the picture resolution:
Auto
(PMD-500D will detect the optimal resolution
automatically),
480i
/
576i
,
480p
/
576p
,
720p
,
1080i
, or
1080p
.
o
HDMI Deep Color:
Select the Deep Color mode for the
HDMI output
:
30 bits
,
36 bits
,
48 bits
,
or
Off
(24 bits). Each setting indicates the total bit depth that an HDMI v1.3 picture will use.
Using a higher bit depth usually improves gradients and color transitions. Your TV must
support HDMI v1.3 for this feature to work properly.
o
Screen Saver:
Set the Screen Saver
On
or
Off
.
•
Closed Caption
o
Closed Caption:
Sets the closed captions
On
or
Off
.
Summary of Contents for PMD-500D
Page 97: ...97 ...
Page 100: ...marantzpro com Manual Version 1 2 ...
