User Guide
56
Frequently Asked Questions
WARNING
Should you use the REVERT button, the only way to recover
the factory configuration is by using Touch Screen Setup
and a Windows PC.
Procedure for reverting to the memory saving REVERT file:
1 Navigate to the HOME panel.
2 Touch the Mode button.
The Mode Menu appears.
3 Touch the Setup button.
The first setup panel appears.
4 Scroll to the second setup panel.
5 Tap the Revert button.
6 Tap Revert to confirm the action.
Note
The REVERT button is not active until at least one change is
made to the configuration (a label, a delay in a macro or one
new code has been learned). Should the button be greyed out,
make a change to the configuration and then use revert.
How do I calibrate the touchscreen?
The RC9200/5200 is calibrated when it leaves the factory, so nor-
mally you do not have to calibrate it yourself. It is possible that the
RC9200/5200 displays a message to calibrate the touchscreen. If
this message appears do the following.
You will see the instruction
“
Touch TOP LEFT corner.
”
1 Tap as close as possible the upper left corner using a blunt tip
of a pencil.
You will see the instruction
“
Touch BOTTOM RIGHT corner.
”
2 Tap as close as possible the bottom right corner using a blunt tip
of a pencil.