Marantz SR5010 Owner'S Manual Download

Page: 102 / 288

The display switches between track title, artist name, and album title each time the

main unit’s STATUS is pressed.

When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album

art data, the album art can be displayed while the music files are playing.

If you use Ver.11 or later of Windows Media Player, the album art for WMA files

can be displayed.

WMA Lossless files can be played when using a server supporting transcoding,

such as Windows Media Player (Ver.11 or later).

This unit plays back picture (JPEG) files in the order in which they are stored in the

folder.

NOTE

When playing back music files with your PC or NAS connected through wireless

LAN, audio may be interrupted depending on your wireless LAN environment. In

this case, connect using a wired LAN.

Depending on the size of the still picture (JPEG) file, some time may be required

for the file to be displayed.

The order in which the tracks/files are displayed depends on the server

specifications. If the tracks/files are not displayed in alphabetical order due to the

server specifications, searching by the first letter may not work properly.

Operations accessible through the option

menu

“Performing repeat playback” (

p. 108)

“Performing random playback” (

p. 108)

“Searching content with keywords (Text Search)” (

p. 110)

“Playing back music and a favorite picture at the same time

(Slideshow)” (

p. 111)

“Setting the Slideshow Interval” (

p. 112)

“Adjusting the volume of each channel to match the input source

(Channel Level Adjust)” (

p. 113)

“Adjusting the tone (Tone)” (

p. 114)

“Displaying your desired video during audio playback (Video

Select)” (

p. 115)

“Adjusting the picture quality for your viewing environment (Picture

Mode)” (

p. 116)

“Playing the same music in all zones (All Zone Stereo)” (

p. 117)

Contents

Connections

Playback

Settings

Tips

Appendix

102

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for SR5010
































































































































































































































































































Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands

Marantz SR5010, Owner'S Manual

Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands