Marantz SR5010 Owner'S Manual Download

Page: 108 / 288

Performing repeat playback

Supported input sources:

USB / Media Server / Bluetooth

While content is playing, press OPTION.

The option menu screen is displayed.

Use

to select “Repeat”, then press ENTER.

Use

to select repeat playback mode.

Off

(Default)

Repeat playback mode is canceled.

One:

A file being played is played repeatedly.

All:

All files in the folder currently being

played are played repeatedly.

Press ENTER.

The display returns to the playback screen.

This cannot be set up if the Bluetooth device does not support the repeat setting

under the AVRCP profile.

“Repeat” settings are stored for each input source.

Performing random playback

Supported input sources :

USB / Media Server / Bluetooth

While content is playing, press OPTION.

The option menu screen is displayed.

Use

to select “Random”, then press ENTER.

Use

to select random playback mode.

Off

(Default)

Disable random playback.

On:

Randomly play back all tracks in the

current playback folder.

Press ENTER.

The display returns to the playback screen.

During random playback, each time playback of a track is completed, another

track is randomly selected for playback from tracks in the folder. Therefore, it’s

possible that you may hear a track played back more than once during random

playback.

This cannot be set up if the Bluetooth device does not support the random setting

under the AVRCP profile.

“Random” settings are stored for each input source.

Contents

Connections

Playback

Settings

Tips

Appendix

108

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for SR5010
































































































































































































































































































Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands

Marantz SR5010, Owner'S Manual

Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands