Marantz SR5010 Owner'S Manual Download

Page: 159 / 288

Mute Level

Set the amount of attenuation when muting is on.

Full

(Default)

The sound is muted entirely.

–40 dB :

The sound is attenuated by 40 dB down.

–20 dB :

The sound is attenuated by 20 dB down.

Audyssey

Set Audyssey MultEQ

XT, Audyssey Dynamic EQ

and Audyssey

Dynamic Volume

. These can be selected after Audyssey

Setup has

been performed.
For additional information on Audyssey technology, please see

“Explanation of terms” (

p. 261).

“MultEQ

XT”, “Dynamic EQ”, “Reference Level Offset” and “Dynamic Volume”

settings are stored for each input source.

When the sound mode is in the “Direct” or “Pure Direct” mode, “MultEQ

XT”,

“Dynamic EQ” and “Dynamic Volume” settings cannot be configured.

This cannot be set when the input mode is set to “7.1CH IN”.

Contents

Connections

Playback

Settings

Tips

Appendix

159

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for SR5010
































































































































































































































































































Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands

Marantz SR5010, Owner'S Manual

Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands