Marantz SR5010 Owner'S Manual Download

Page: 219 / 288

Firmware

Checks for the latest firmware information about updates and upgrades,

updates the firmware, and sets up the notification message display for

updates and upgrades.

Update

Updates the firmware of this unit.

Update:

Execute the update process. When the

update starts, the menu screen is shut

down. During the update, the progress is

shown on the display.

This unit automatically retries updating if updating fails. If the update still fails,

either one of the following messages will appear on the screen. If the display

reads as shown below, check the settings and network environment, then

update again.

Display

Description

Updating fail

Updating failed.

Login failed

Failure to log into server.

Server is busy

Server is busy. Wait a while then try again.

Connection fail

Failure in connecting to server.

Download fail

Downloading of the firmware has failed.

Notifications

When the latest firmware is available, a notification message is

displayed on the TV screen at power on.
The notification message is displayed for about 40 seconds when the

power is turned on.

Update

(Default)

Display update message.

Off:

Do not display update message.

Upgrade

(Default)

Display upgrade message.

Off:

Do not display upgrade message.

Contents

Connections

Playback

Settings

Tips

Appendix

219

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for SR5010
































































































































































































































































































Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands

Marantz SR5010, Owner'S Manual

Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands