Marantz SR5010 Owner'S Manual Download

Page: 252 / 288

Playing back a file saved on a PC or NAS

This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.

This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4.

This unit is compatible with WMA META tags.

If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played

back properly.

A server or server software compatible with distribution in the corresponding formats is required to play music files via a network.

Specifications of supported files

Sampling frequency

Bit rate Extension

WMA

32/44.1/48 kHz

48 – 192

kbps

.wma

MP3

32/44.1/48 kHz

32 – 320

kbps

.mp3

WAV

32/44.1/48/88.2/

96/176.4/192 kHz

–

.wav

MPEG-4 AAC

32/44.1/48 kHz

16 – 320

kbps

.aac/

.m4a/

.mp4

FLAC

32/44.1/48/88.2/

96/176.4/192 kHz

–

.flac

ALAC

32/44.1/48/88.2/

96 kHz

–

.m4a

DSD

2.8 MHz

–

.dsf/

.dff

AIFF

32/44.1/48/88.2/

96/176.4/192 kHz

–

.aif/

.aiff

1 Only files that are not protected by copyright can be played on this unit.

Content downloaded from pay sites on the Internet are copyright protected.

Also, files encoded in WMA format when ripped from a CD, etc. on a computer

may be copyright protected, depending on the computer’s settings.

2 Copyright [2012] [D&M Holdings. Inc.]

Licensed under the Apache License, Version 2.0 (the “License”); you may not

use this file except in compliance with the License. You may obtain a copy of

the License at

http://www.apache.org/licenses/LICENSE-2.0

In ZONE2, it is not possible to play the DSD signal.

Contents

Connections

Playback

Settings

Tips

Appendix

252

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for SR5010
































































































































































































































































































Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands

Marantz SR5010, Owner'S Manual

Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands